NexusHD2 Android Forum

Hi Tytung, I shows the maximum frequency of only this firmware - Dark! Dea_by_IBTeam_1.6_Stable_final kernel of Mark ..


Why your kernel shows only 768Mhz? And how to fix?
I like your firmware

Electrician wrote:Hi Tytung, I shows the maximum frequency of only this firmware - Dark! Dea_by_IBTeam_1.6_Stable_final kernel of Mark ..


Why your kernel shows only 768Mhz? And how to fix?
I like your firmware

Mine shows tytungs kernel and shows and lets me set it as high as 1190Mhz...I'm on v3 dataonext...

Sent from my NexusHD2 using Tapatalk

Kameirus wrote:
Mine shows tytungs kernel and shows and lets me set it as high as 1190Mhz...I'm on v3 dataonext...

Sent from my NexusHD2 using Tapatalk

+1

Sent from my MB526 using Tapatalk

Electrician wrote:Why your kernel shows only 768Mhz? And how to fix?
I like your firmware

The kernel isn't the problem.

Hi Tytung,

a made a little test todady with the V4.3 version (21.01.2014).

SMS is ok (send/receive), MMS is not ok (send/receive).

And, I can set all CPU frequencies from 96...1190MHz.
It seems the cpu frequncies are correct displayed.

soren wrote:The kernel isn't the problem.

ok .. What's the problem? And why on the other firmware is displayed 998MHz?

I have a problem...

I installed this build on my HD2 and phone don't want turn on.

I can see magldr:

Booting Android from NAND
.
.
.
.
Load done!
12345 GO GO GO

then logo HTC, after second HTC disappears and I have black screen but illumintaed.

I choose data on EXT and made ext4 1gb partition.

Anyone can help me with this problem?

Electrician wrote:ok .. What's the problem? And why on the other firmware is displayed 998MHz?

I don't know. But I'm using tytung's kernel and I can set the clock to 1190 MHz.

Golden wrote:I choose data on EXT and made ext4 1gb partition.

Anyone can help me with this problem?

Try to resize your system partition to 400 MB.

NiksNut wrote:Can someone clear up for me why on the SD Card Only option Tytung wrote ''(Don't use a class 10 UHS-1 card)''? I've searched but couldn't find anything via the search option. I JUST bought a SanDisk Class 10 UHS-1 card so this is bugging me a bit although I use DataOnExt, not SD Card Only.

I'm also use sandisk class 10 uhs-1 1 year later and still use it n I'm running KitKat 4.4.2 ROM build by tytung via band+ext4.but for me no problem everything is working.. It's only have problem if flashing it via native SD..

nexushd2 KitKat

Golden wrote:I have a problem...

I installed this build on my HD2 and phone don't want turn on.

I can see magldr:

Booting Android from NAND
.
.
.
.
Load done!
12345 GO GO GO

then logo HTC, after second HTC disappears and I have black screen but illumintaed.

I choose data on EXT and made ext4 1gb partition.

Anyone can help me with this problem?

Mine had the same issue. Not sure if the same cause as yours. My system partition was too small. I repartitioned to 300 MB. It has been all good. Good luck.