NexusHD2 Android Forum

soren wrote:Don't install a Jelly Bean ROM. You can follow the post above. But task 29 is unnecessary.

The ROM I installed is: NexusHD2-JellyBean-CM10.1_V2.2, but like I said in my previous post, I want to use the 4ext Recovery to flash the 4.4 ROM. But I can't access 4ext anymore. Anyway I can do that?

I don't know. Anyway, you will probably have a problem if you upgrade from a Jelly Bean ROM.

soren wrote:I don't know. Anyway, you will probably have a problem if you upgrade from a Jelly Bean ROM.

I installed CLK and flashed the 4.4 but the first time I rebooted it went into the Recovery mode straight away. Since then, everytime I reboot, it goes into this black screen with a bunch of white text. Something like "fastboot_init(), udc_start (), --suspend--". I think it's the Fastboot screen. I can't boot into Android anymore and it's frustrating. I think I'll go back to 4.2.2 again. Thank you everyone!

F.E.K. wrote:I tested multiple wifi analyzer, but dont works... No "see" the wifi (maybe not authorized the interface?)

Any idea?

TapaTalk4: NexusHD2

I updated V4.4, and now working all again

TapaTalk4: NexusHD2

Hello to all.

I have a question, I have an HD2 and flashed on it wp7.8 so i have magldr 1.13. can I somehow dualboot this rom on it?
Because Im trying it already two days, and after GO GO GO appears the green HTC logo and just stays there...
Thanks for any help before.

What suggestions do you have for a high battery consumption?

i installed 4.2.2 and update 4.4 that .

and in have high battery consumption.

Hi @tytung,

thx for your Upgrade! Works perfekt with install Method you recommend...

But i see Errors in Log , can you have lock of this ?

http://pastebin.com/j4hbAKFH

This is very often :


[spoiler02-21 09:48:34.762 V/BufferedAnalyticsState(905): Not ready for upload, 232 seconds left.][/spoiler]

After a while my Device doesnt work .
Picasa Uploader fc
gapps fc
acore fc
media fc
and so on

After reboot , Wipe Cache and Dalvik Cache , Device working normally

Hello.

I have the following:

Device: HTC HD2 (LEO1024 - T-Mobile USA)
HSPL: 2.08.HSPL
Radio: ?
Bootloader: MAGLDR v1.13
Recovery: ?

I have succesfully installed NexusHD2-KitKat-CM11.0 ROM using NAND type of installation.

Unfortunately, when I reboot the device, after the "HTC" initial banner, the screen become blank.

What could have happened? What might be due?

Should I try a different kind of installation (maybe NAND with DataOnEXT or NativeSD)? In a such case how I have to do to create partitios as required?

BTW: When I start installation I see that the system NAND is 176MB and 175MB Free. It could be a problem? Why the system NAND is only 176MB? I see also that the Data NAND is 746MB.. It is possible to extend the system NAND e reduce the data NAND if it could be worth to solve the problem? In case, how I have to do?

Regards,

rocsca

Installed 4.3 then updated to 4.4 with system 300 after a task 29 repartioning MAGDLR , So far so good! so Smooth and snappy! Thanks tytung for this awesome work! No Fcs so far all went well once used Slimrom 4.3 with the same kernel..battery wud be similiar i guess hope so (y)

Viber doesn't work, again phone freezes, buzzing etc. Damn...